Vegetation Management Act 1999 QLD | What It Means for Your Land

The Vegetation Management Act 1999 is the Queensland law that regulates the clearing of native vegetation on freehold, Indigenous and leasehold land. It works by mapping vegetation into categories across the whole state, then setting the benchmarks against which any clearing of a regulated category is assessed — and it is administered by the State, not by your council.

That last point is the one that costs people money. The Act runs entirely separately from your council’s tree rules. They are two approval systems over the same tree, and satisfying one does nothing whatsoever for the other.

For most suburban blocks, the honest answer is that this Act does not affect you and your council’s local law is the only thing you need to worry about. On acreage, semi-rural and rural-edge land it can matter a great deal.

What the Vegetation Management Act regulates

The Act regulates clearing of native vegetation — and both of those words are narrower than they sound.

Clearing is defined broadly enough to catch most things that kill a tree: removing, cutting down, ringbarking, pushing over, poisoning, or destroying vegetation in any way, including by burning, flooding or draining.

Two exclusions matter enormously if you work with trees rather than paddocks:

Lopping branches is not clearing where the trunk is left standing. Pruning a tree, however hard, is outside this framework. Your council’s local law may still regulate it — Brisbane’s certainly does — but the state Act does not.
Stock destroying standing vegetation is not clearing either.

“Native vegetation” means a native tree or plant, but expressly not grass or non-woody herbage, plants within a regional ecosystem mapped as grassland, or mangroves.

The practical consequence for a suburban tree owner is large. A jacaranda, a camphor laurel, a poinciana, a mango — none of these is native vegetation, so none of them is regulated by this Act at any size. Your council may well protect them anyway. Brisbane’s significant landscape tree list is mostly exotics, and that list has nothing to do with the State.

Vegetation management versus council tree rules

This is the section worth reading twice, because the two systems are routinely confused and the confusion is expensive.

They are separate laws, administered by separate levels of government, with separate maps, separate applications and separate penalties. The Queensland Government’s own guidance is explicit that some local governments have local laws or planning scheme requirements that also regulate clearing, and that these apply in addition to the state framework.

What that means in practice:

A state approval, a clearing code notification, or state-level exempt status does not authorise you to touch a tree your council protects.
A council permit does not authorise clearing that the state framework regulates.
Where both apply, you need both. Where only one applies, you need only that one — and working out which is the whole exercise.

The asymmetry is worth understanding. Council rules tend to work tree by tree: this species, at this trunk size, on this lot. The state framework works property by property: this parcel carries this mapped category, and what you may do follows from the category rather than from the individual tree.

For an ordinary suburban removal, the council rules are almost always the binding constraint and the state framework is silent. On a five-acre block on the rural edge, both can bite at once.

The rules for each South East Queensland council are set out separately on this site.

How vegetation is mapped

The State publishes a regulated vegetation management map covering the whole of Queensland. Every parcel carries one or more categories, and the category — not the tree — determines what applies.

Category	Colour on the map	What it means
A	Red	Compliance areas, environmental offset areas and declared areas. The most tightly controlled.
B	Dark blue	Remnant vegetation — endangered, of concern or least concern regional ecosystems retaining more than 50% of the undisturbed predominant canopy and averaging more than 70% of the undisturbed height.
C	Light blue	High-value regrowth on eligible land that has not been cleared for at least 15 years.
R	Yellow	Areas within 50 m of a watercourse or drainage feature in Great Barrier Reef catchments.
X	White	Everything not mapped as A, B, C or R. Not regulated under the framework.

Most suburban South East Queensland is Category X. That is why the Act is irrelevant to the overwhelming majority of back-yard tree work — and why, when someone tells you the State controls their suburban gum tree, the first thing to do is look at the map rather than argue.

The map is generally updated annually against current satellite imagery, so a report pulled three years ago is not authority for what applies today.

How to check what applies to your property

The State provides a free vegetation management property report for any property in Queensland. It is the definitive answer and it costs nothing.

Go to the Queensland Government’s vegetation management map request and complete the request form for your property.
The report arrives by email as a PDF, usually within three business days.
Read the regulated vegetation management map first — this gives you the categories, which is the answer to “does the state framework apply here at all”.
Then read the vegetation management supporting map, which adds regional ecosystems, wetlands, watercourses and essential habitat.

The same report also includes a protected plants flora survey trigger map and a koala habitat areas map, both of which are separate regimes again and both of which catch people in South East Queensland.

Do this before you commission anything or book any work. It is free, it takes three days, and it settles the question that everything else depends on.

When you need approval and when you don’t

There are four routes to clearing lawfully under the state framework, and only one of them involves an application.

Exempt clearing work — no approval, no notification. This is the largest category by far.
Accepted development vegetation clearing codes — routine, lower-risk clearing you may carry out under a published code, having notified the department first. There is a public register of those notifications.
Development approval — the formal route, assessed against the Act’s benchmarks under the Planning Act 2016.
Area management plans — property-specific plans authorising particular clearing.

The exemptions are genuinely broad and are not worth attempting to list in full here. Their shape is what matters: all clearing of Category X; clearing for necessary buildings and structures up to two hectares; fences, roads and tracks to a limited width; firebreaks and fire management lines; maintenance of existing infrastructure; and — the one most relevant to tree work — clearing necessary to remove or reduce an imminent risk that vegetation poses to people or infrastructure.

That last exemption is narrower than people hope. “Imminent” is doing real work in that sentence, and a tree that merely worries you is not a tree posing an imminent risk. This is precisely the situation where a documented tree risk assessment is worth far more than an opinion, because the burden of showing the exemption applied sits with you after the fact.

The current exemption list is published by the department and changes; read the exempt clearing work page rather than relying on a summary, including this one.

Where this catches people in South East Queensland

Plainly: if you are on a standard suburban lot, this Act almost certainly does not apply to your tree. Your council’s local law does. Do not let anyone sell you a state-level process you do not need.

Where it does bite is the rural edge, and South East Queensland has a lot of it:

Moreton Bay — the hinterland and the northern and western fringes, where acreage blocks carry remnant and regrowth mapping alongside Council’s own habitat tree rules.
Logan — larger lots in the south and west, frequently mapped for vegetation and koala habitat at the same time, on top of Logan’s own circumference-based thresholds.
Sunshine Coast — the hinterland behind the coastal strip.
Gold Coast — the hinterland and the western rural belt.

The pattern is consistent. A block big enough to carry mapped remnant or high-value regrowth is also usually a block where the council’s own overlays apply, so both systems are live and the sequencing matters: get the property report first, because it tells you whether you are running one process or two.

Watercourses are the other common trap. Category R runs 50 m from a watercourse or drainage feature in Great Barrier Reef catchments, and a drainage line that looks like nothing on the ground can still be mapped.

Penalties for unlawful clearing

Clearing that requires approval and proceeds without one is enforced through the Planning Act 2016, because the Vegetation Management Act works by supplying the assessment benchmarks for clearing as assessable development under that Act. The maximum penalty for carrying out assessable development without a permit is 4,500 penalty units — $777,150 at the current $172.70 a penalty unit.

The Act carries its own offences as well. Clearing in an interim declared area under section 18 carries a maximum of 1,665 penalty units, or $287,545.

In practice the enforcement most landholders encounter is not a prosecution. The department can issue fines and, more significantly, require that cleared vegetation be restored — which on mapped remnant vegetation is a substantially larger cost than any fine, and one that runs for years.

Both figures are maximums set for the worst cases. The point is not the number, it is that clearing first and asking afterwards is the single most expensive way to approach this.

Vegetation Management Act questions

Does the Vegetation Management Act apply to my suburban block?

Usually not. Most suburban land in South East Queensland is mapped Category X, which is not regulated under the framework, and a great deal of suburban tree work involves planted exotics that are not native vegetation at all. Your council’s local law is almost always the binding constraint on a suburban block. Request the free property report and you will know for certain in three days.

Do I need council approval as well as state approval?

Where both apply, yes — they are separate systems and neither substitutes for the other. A clearing code notification to the State does not authorise you to remove a tree your council protects, and a council permit does not authorise clearing the State regulates. Check both before any work, and be aware that approvals can arrive on different timelines.

Does it apply to trees I planted myself?

It can, but for a different reason than people expect. The framework attaches to the mapped category of the land and to whether the vegetation is native, not to who planted it. A native tree you planted that now sits inside mapped remnant or high-value regrowth is regulated like any other. An exotic you planted is not native vegetation and falls outside the Act entirely — though your council may protect it regardless.

What counts as native vegetation?

A native tree or plant, other than grass or non-woody herbage, plants within a regional ecosystem mapped as grassland, and mangroves. Exotic and introduced species are outside the definition, which is why a great many of the trees people most want removed in suburban Brisbane — camphor laurel, jacaranda, poinciana — are not regulated by this Act at all, whatever their size.

Who administers the Act?

The Department of Natural Resources and Mines, Manufacturing and Regional and Rural Development administers vegetation management and compliance. The free property report and mapping service is provided through the Queensland Government, with the Department of Environment, Tourism, Science and Innovation the contact for the maps themselves. Neither is your council, which is the whole point of this page.

Information reviewed 13 September 2026, against the Queensland Government’s vegetation management guidance and the Vegetation Management Act 1999 as in force. Mapping, codes and exemptions change — this is general information, not legal advice, and the department’s own pages are the authority.

The Vegetation Management Act 1999 in Queensland